Bow Accessories Bowhunting gear Travel

TightSpot Quiver Review: 5 vs 7 Arrows

This photo shows the top of the TightSpot Quiver.

Our favourite quiver is undeniably the TightSpot 5-Arrow Quiver, however it’s adopted by the TightSpot 7-Arrow Quiver. Each are astoundingly properly engineered. They’re constructed within the USA they usually include TightSpot’s IronClad assure: If the TightSpot Quiver breaks on the unique proprietor for any purpose, TightSpot will restore or exchange it without charge.

Fairly exhausting to beat that. The truth is, the TightSpot Quiver is so good, it made our Greatest Presents for Bowhunters Information.

To get us a better take a look at its quivers, TightSpot despatched us each variations to guage this searching season. That is what we discovered:

TightSpot 5-Arrow and 7-Arrow Quiver Evaluate

For this evaluate, I’ll focus totally on the 5-arrow TightSpot quiver, then cowl the variations between the 5-arrow and 7-arrow quiver variations.

The TightSpot Quiver’s declare to fame begins with its ingenious mounting system: You’ll be able to mount the TightSpot quiver a lot nearer to the aspect of your compound bow than you’ll be able to with most different quivers.

The TightSpot Quiver has a big hood to guard your broadheads. Higher but, it has superior general adjustability, vibration discount and boasts arrow grippers you’ll be able to tighten for good arrow match.

This shifts extra weight nearer to the middle of your bow, which reduces torque. If you consider this, any weight that extends out from the aspect of your bow’s riser will create some kind of torque or tilt or lean. Should you maintain your bow upright with a pair of chopsticks underneath the swell of your grip, your bow will need to tip towards the aspect the quiver is hooked up to. The additional away the quiver is, the extra impact that weight may have.

In fact, for short-distance archery, the load of a quiver is pretty minor. When you try longer and longer photographs, minute results of gravity and strain begin to add up.

As a result of the TightSpot quiver allows you to mount the quiver nearer to the bow’s middle of gravity, you could have much less exterior drive positioned on the aspect of your bow.

Even with the TightSpot, there’s some weight there. So to compensate, some highly-tuned shooters will place a rear stabilizer out the decrease again portion of their bows on the aspect reverse their quivers. The draw back of that in a searching state of affairs is that you’ve extra weight and elements protruding of your bow. The TightSpot Quiver helps mitigate all of this.

TightSpot Quiver Evaluate: Wonderful Adjustability

Whereas the TightSpot Quiver can mount very tightly to the aspect of your bow, the included mounting brackets and patented dovetail rail allow you to regulate how shut or far you need the quiver out of your riser.

As well as, in the event you’re critical about tuning and discovering the most effective general stability on your searching bow, you’ll be able to rotate the TightSpot Quiver to maneuver the middle of gravity ahead or again.

This photo shows the TightSpot Quiver mounting bracket on a compound bow.

The TightSpot Quiver mounting bracket provides you large adjustability. You possibly can reverse the bracket for a decent match or for extra clearance in your specific relaxation. Right here it’s proven reversed for additional clearance — principally, you might have loads of room to play with by yourself bow setup.

Plus, you’ll be able to transfer the quiver up and down the carbon fiber rods. For me, for searching conditions, I positioned the quivers as tight as I might ensuring that I didn’t have an effect on the movement of my limb-driven drop-away Hamskea Hybrid Hunter Professional relaxation.

As for stability, I would like my arrows to line up parallel with my string, extra so for general tidiness than shot-helping stability. I spend a variety of time pushing by way of brush and timber and never having something stick out is extra essential to me than good stability. No less than proper now. The great factor concerning the TightSpot is that it’s so adjustable. In case you get a brand new bow or get critical about dialing in long-distance photographs, you’ll recognize the adjustability.

One word: The TightSpot Quiver isn’t ambidextrous — you need to select the right-hand model for those who’re right-handed and the left-handed model should you’re left-handed.

TightSpot Quiver: Cease Dropping Harmful Arrows!

For me, there’s one key to the TightSpot Quiver that instantly makes it a sensible selection: You possibly can modify the tightness of the arrow grippers. For those who change arrows to a smaller diameter arrow, no drawback! You’ll be able to tighten the grippers. Plus, the grippers don’t put on out and get sloppy — as they put on, in the event that they put on, you’ll be able to regulate them tighter. So cool.

This image shows the grippers of the TightSpot Quiver.

Our favourite function of the TightSpot Quiver is its adjustable arrow grippers.

When it comes to significance to bowhunters, none of that is that massive of a deal to a bowhunter who walks right into a tree stand on a well-defined path after which takes off their quivers once they’re up within the tree stand.

It issues a heckuva lot to any elk hunter or spot-and-stalk bowhunter. Why? As you progress by way of brush and timber, you’ll be able to lose an arrow out of your quiver. I by no means thought this was an enormous deal till it occurred to me. Whereas turkey searching after sneaking up on a chatty tom, which ultimately left the world, I observed a lacking arrow. I had no concept when or the way it left my quiver — my consideration was all the time on the tom. Worse, that arrow had a super-sharp broadhead on it.

That arrow might have slipped off and it might have jabbed me someplace. If it took out a femoral artery, that would have been recreation over. Or recreation over for the the man behind me. Assume this could’t occur? Simply this yr an elk hunter, 2.5 miles from a pickup, misplaced an arrow out of his quiver in thick brush, didn’t discover it and tripped over it, stabbing himself within the leg. Thankfully the broadhead missed a serious artery, and by chance, the hunter had three buddies with him and have been capable of carry him to security.

I don’t know if the hunter had a TightSpot quiver or not — or even when a TightSpot quiver would have modified the result. In case you stroll within the woods, you already know there are all the time hundreds of thousands of variables. However based mostly on my expertise with the TightSpot Quiver this yr in heavy brush, I do consider the TightSpot may also help safe most anybody’s arrows to their satisfaction as a result of the grippers are so adjustable.

This photo shows the TightSpot Quiver with arrows installed.

When you change arrow diameters between seasons, you’ll be able to modify the grippers.

There’s extra right here, although: Private security is one factor, however the danger extends to your gear. If a broadhead nicks a string or cable on the best way out of the quiver, it might finish your hunt and perhaps your bow.

I began asking different bow hunters in the event that they’d ever misplaced an arrow, and it seems, most of them had. Some have been capable of retrace their steps and discover the misplaced arrow. I did. And this brings up one other issue: Value. In case you really lose the arrow with a broadhead hooked up, that may be a spendy mistake. By no means thoughts the time it took to construct and tune the arrow.

As for adjustability, you’ll be able to regulate the tightness of match to your liking. As a result of I hunt in numerous brush, I ratchet my grippers down pretty tight. You want a hex-head wrench to tighten the grippers, and if you modify one it could actually have a small cascade impact on the others according to it. Consequently, I discovered that it’s essential regulate tightness forwards and backwards among the many grippers, testing every arrow a couple of occasions to get all of it dialed in. It’s not onerous. Took lower than 5 minutes.

So the TightSpot gripper system? To me, that’s an important function of the quiver, by far.

Store TightSpot Quivers at BlackOvis and get free delivery on all home orders!

TightSpot Quiver Vibration and Sound

I’m not the type of man to interrupt out a meter to measure sound or vibration, however in my expertise, the TightSpot Quivers appeared to dampen felt vibration in addition to dampen sound. Was it transformative to the capturing expertise? No, however it was noticeably higher than capturing with a standard low-cost entry-level quiver.

This photo shows the rubber bumper on the TightSpot Arrow Quiver.

The mounting bracket features a rubber bumper that allows you to relaxation the center three arrows towards it to additional scale back vibration and sound.

TightSpot claims that its quivers kill vibration and sound in 5 methods.

1. The additional-long “wheelbase” of the TightSpot quivers provides you an extended distance between the arrow grippers and the hood, which TightSpot says reduces arrow and quiver vibration (in comparison with quivers that would go away extra arrow protruding of the underside of the quiver).

2. TightSpot features a bumper strip on the crossbar that arrows can relaxation towards when within the quiver. This level of contact may help dampen arrow vibrations.

three. TightSpot has a “QuadFit” Four-way spacer on one of many carbon rods. It permits you to slide the spacer towards your cable guard to create some extent of contact towards your bow to assist take up vibration. (Due to the clearance I needed with my limb-driven relaxation, I didn’t use this function.)

Four. The TightSpot quiver makes use of two lengthy woven carbon rods that present nice stability and, once more, assist take up vibration.

5. Final of all, TightSpot makes use of an acoustic dampening materials contained in the hood of the quiver within the area between the hood ceiling and the insert. This, too, makes the quiver quieter.

The TightSpot quiver — like most good quivers — helped scale back some felt vibration on my photographs and appeared to quiet two totally different bows. To me, all of that is extra of a bonus than a serious shopping for standards.

TightSpot Quiver Evaluate: Grippiness

I used to be initially involved concerning the TightSpot Quiver’s potential to carry arrows as a result of there is just one gripper for every arrow, not two. The sector level or broadhead sticks into the hood of the quiver and is just held there as a result of it’s recessed and the gripper creates some rigidity if you put the arrow in correctly.

For those who’re a bowhunter who doesn’t need the sharp fringe of a broadhead to the touch something, this design may make you pause. And for those who’re utilizing an expandable broadhead, how may this design have an effect on your broadheads?

TightSpot has a solution for you: A Secondary Gripper accent. I haven’t tried it out, however I can inform you this: For those who lodge the purpose of your broadhead into the hood and slide the arrow into your gripper with a little bit of upward rigidity towards the hood, your arrow shall be very safe. When you completely don’t need broadhead contact, get the Secondary Gripper accent.

TightSpot 5-Arrow vs 7-Arrow Quiver

For many bowhunters more often than not, the TightSpot 5-Arrow Quiver will maintain sufficient arrows for many bowhunting conditions. However, the 7-Arrow Quiver weighs simply 1/10th of 1 as soon as extra: 10 ounces vs 9.9 ounces. With primarily no weight penalty, why not? That stated, the extra arrows you keep it up the aspect of your bow, the extra weight you need to pack — and the extra torque you’re going to create.

This photo shows the TightSpot Quiver attached to a compound bow.

The TightSpot 5-Arrow Quiver hooked up. It has a variety of built-in adjustability, giving loads of room for a cumbersome limb-driven relaxation. Non-compulsory brackets supply much more changes if wanted (unlikely for many bowhunters).

As well as, the additional two slots end in a flipped bracket that provides room for 2 backside arrows. These two arrows (as an alternative of three) then relaxation on the bracket’s bumper and assist scale back vibration. When you select the 7-arrow model however choose to not use the additional two slots more often than not, you possibly can flip the mounting bracket to match the 5-arrow configuration to get three arrows to relaxation towards the rubber bumper (however you’ll should flip it again should you head out on an epic hunt the place you need seven arrows in your quiver).

So, for those who’re going to go out on a real backcountry hunt, having two additional slots might be a particular benefit in case you hit a limb and lose an arrow. Or flat-out miss. When you wish to grouse hunt whereas elk searching however hesitate to sling your greatest arrows at grouse, having two additional slots would allow you to pack arrows you may dedicate to grumble.

For the sake of simplicity, we just like the 5-arrow model greatest — nevertheless it’s not technically higher than the 7-arrow model in any significant approach. In truth, you might argue that the 7-arrow quiver is best as a result of it may well maintain extra. It’s completely a private choice type of selection — and the pricing between the 2 is identical.

Store TightSpot Quivers at BlackOvis and get free delivery on all home orders!

TightSpot Quiver Evaluate: The Verdict

The TightSpot 5-Arrow Quiver and TightSpot 7-Arrow Quiver are each astoundingly well-engineered quivers that allow you to regulate the tightness of the arrow grippers to match the diameter of your arrows. As well as, its light-weight, slim design allows you to place the quiver tight to your bow, decreasing accuracy-robbing torque. Like most nice quivers, the TightSpot reduces vibration and sound, too. So far as value goes, the TightSpot is on the very high-end of the worth spectrum, however it’s made in America and is backed by a lifetime assure. When you think about the price of dropping an arrow within the brush — by no means thoughts the hazard concerned — the worth of the TightSpot gripper design turns into notably compelling. Very extremely beneficial.

Get the Gear:

!perform(f,b,e,v,n,t,s)
if(f.fbq)return;n=f.fbq=perform()n.callMethod?
n.callMethod.apply(n,arguments):n.queue.push(arguments);
if(!f._fbq)f._fbq=n;n.push=n;n.loaded=!zero;n.model=’2.zero’;
n.queue=[];t=b.createElement(e);t.async=!zero;
t.src=v;s=b.getElementsByTagName(e)[0];
s.parentNode.insertBefore(t,s)(window, doc,’script’,
‘https://connect.facebook.net/en_US/fbevents.js’);
fbq(‘init’, ‘1856479427921163’);
fbq(‘monitor’, ‘PageView’);